End mill range expanded

The three-flute solid carbide single and square end series has made a significant impact in the marketplace since its recent introduction. The straight shank, right hand cut series with its 55 degree right hand helix is well suited to the rapid removal of 'soft' material and its swarf from the work area. Designed to deliver remarkable performance on soft materials, it is the special flute geometry that contributes to this excellent swarf clearance. Outstanding surface finish is guaranteed due to the cutters rigidity and the circular land and end teeth 'wipers'. The new 3041 Cyber Series with radius is available in 3, 4, 5, 6 and 8 mm diameters with a choice of 0.5 or 1mm radius. The 8, 10, 12, 16, 20 mm diameter cutters are available in 0.5mm increments from 0.5mm up to 2mm to meet the varying needs of its customers. However, ITC can offer additional sizes and radii upon request and as a UK based manufacturer, a rapid turnaround is a given – something ITC is finely attuned to with its wide spectrum of F1 and aerospace customers. The wide range of radii, make the 3041 Series the cutter of choice for machining forms in pockets. The 3041 Cyber Series has a length of cut ranging from 12 mm to 40 mm with an overall length from 38 mm on the 3 mm diameter to 100 mm on the 20 mm diameter cutters. Research and development at ITC has found that these respective lengths provide the optimal cutting conditions with regard to productivity whilst the surface finish and tool life achieved with the 3041 is also way beyond that of competitor cutters. Customers wanting to machine deep pockets or long faces can find their solution with the 3051 Series of long length end mills. For further details on the 3041 Series or any of the other cutting tools in the ITC range, please contact us on Tel: 01827 304500