Decades after the original race to reach the moon, companies in the space industry are competing in new ways. While the field was traditionally led by global or national space agencies – such as NASA and ESA – as it has become easier and cheaper to develop components, more aerospace companies have explored the potential of space applications.
Advancements in technologies such as sensors and microprocessors have led to the miniaturisation of components for communication, data processing and more. Combined with the development of new composites, such as carbon fibre and other lightweight alloys, it has become easier to develop smaller, more affordable satellite platforms.
Space agencies and research institutions are now not the only companies operating in the space industry, with many private companies looking to fill the growing demand to provide services for smaller satellites.
The space industry differs from other sectors, such as consumer goods or commercial aerospace, because of production rates. Space agencies will develop individual satellites during a project, while small companies will produce small batches of components – manufacturers will rarely produce over 100 units, and every product will be highly customised.
As a manufacturing method, metal AM is well suited to rapid prototyping and the low-volume production of highly customised parts, so there is a clear opportunity for manufacturers in this space to embrace AM technology.
Finding the right balance
“As the industry becomes more competitive, reducing lead times and costs while maintaining quality and reliability will continue to be a key challenge,” explained Marta García-Cosío Carmena, Managing Director, CiTD.
“To find the right balance between cost and efficiency, manufacturers should take the time to understand all operational requirements at the outset of the project. Space satellite platforms must meet tight tolerances to ensure performance and precision – any deviation when operating in a harsh environment like space can lead to malfunction and even mission failure.
“The space industry is incredibly competitive, so we often find that manufacturers are more willing to take calculated risks to balance cost, performance and speed. While it’s clear that AM offers the speed and design flexibility required in these applications, it is a costly technology, so manufacturers should consider how to find the best balance.”
Subtractive or additive
Metal AM has been a useful tool in the production of high stability components, giving manufacturers such as CiTD the ability to design and manufacture parts with better stiffness to strength ratio when compared with traditional manufacturing methods.
However, it’s important to understand that AM technologies complement traditional methods, not replace them.
“Determining the best manufacturing method requires engineers to review the part and its performance. If AM can improve part performance, such as delivering better conductivity or weight to strength ratio, it will add value to the final component,” explained Lidia Hernández Álvarez, Head of Additive Manufacturing at CiTD.
“Parts such as heat exchangers and radio frequency (RF) antennas are good examples of where to use AM, because engineers can optimise the geometry to improve efficiency. Alternatively, when developing simple yet core components, such as flat plates, additive adds no value to its properties, so it will always be better to use traditional machining.”
The JUICE mission
To explore Jupiter’s complex environment, as well as its three large ocean-bearing moons – Ganymede, Callisto and Europa – the European Space Agency (ESA) launched the JUICE mission. Working in collaboration with AIRBUS Defence and Space, CATEC and CiTD, ESA set an objective to optimise the structure of the explorer and reduce its weight as much as possible.
“Our team helped produce eleven additively manufactured secondary structure brackets for the JUICE project, using AM technology to deliver lightweight, high-performance parts,” continued García-Cosío Carmena. “By using high strength aluminium alloys, optimising component design and collaborating with the other AM specialists on the project, we were able to produce brackets that were 50 per cent lighter than traditional ones.”
The project was also a unique experience for Renishaw, as it marked the first time that any product featuring parts manufactured on a Renishaw AM system would travel to Jupiter and its satellites.
The JUICE mission launched in April 2023 and is due arrive on Jupiter in October 2029, where it will spend three years making detailed observations of the planet and its satellites.
What’s next?
As AM technology advances, improved productivity will help lower cost per part and open the technology to new applications. In terms of space applications, any development should improve the robustness of the process and ensure that parts can meet the tight tolerances expected in the sector.
As companies compete to capitalise on the burgeoning opportunities in space exploration, the convergence of subtractive and additive manufacturing methods presents manufacturers with the design freedom to develop unique components as well as the accuracy to meet stringent demands. By focusing on precision, performance and cost-effectiveness, manufacturers can expect AM to help develop groundbreaking advancements in future space applications.