Suitable for ramp and slot milling applications, Chase2Mill is available in end mill, modular or face mill designations. Initially launched with a four-corner, double-sided 4NKT 06 insert range featuring a 90° entry angle that is suitable for high ramp-down applications, the 4NKT 06 has been expanded and a newly developed 4NHT insert series released.
The 4NKT 06 corner R range insert has been extended (04R-20R) to meet the wider range of corner radius requirements demanded by today’s industry. Adding to the existing 8 and 16 mm radius inserts, TaeguTec has expanded the line to include a 4, 12 and 20 mm radius offering. The extended 4NKT 06 is available with TaeguTec’s ML and M geometry, and the TT8080 and TT9080 grades, which combine to improve cutting load, minimise built-up-edge and generate high surface finish, says the company.
TaeguTec’s 4NHT 06 insert designation has also been launched with the 4NHT 06-ML, which is said to be characterised by its ability to generate low cutting loads and high surface finishes (credit to ground cutting edges that minimise built-up-edge).
A further introduction is the 4NHT 06-AL series of uncoated inserts for aluminium and non-ferrous cutting applications.