As with MACH 2014, Ellesco will once again be inviting manufacturers to bring parts to the show to trial the surface finishing capabilities of the Timesavers range.
From its Grindingmaster-Timesavers stable, Ellesco is showing five machines, including the two compact Timesavers 10 Series machines – one of which is the giveaway – andthe Timesavers 12 Series WB, the 22 Series 900W and the 42 Series WRBW machine.
The smallest machine, the Timesavers 10 Series, is a manual grinder that provides a cost-effective alternative to conventional grinding and deburring. Its head consists of a grinding wheel and a flap brush that can be tilted 180 °. With a weight-bearing arm, the head can be moved over the work piece to create uniform finishes.
The next step up is the 12 Series WB machine. At MACH, Ellesco will show the 600 mm-wide variant with abrasive deburring belt and ScotchBrite brush for relatively small components (up to 125 mm thickness). Table feed rate ranges from 3 to 9 m/min and parts can weigh up to 100 kg, depending on the model. Furthermore, at MACH the 12 Series will have a magnetic track to demonstrate how the machine can process very small steel parts without any fixturing or workholding.
For larger applications, Ellesco’s 22 Series 900W machine incorporates a 900 mm wide table. This single head deburring machine for the deburring and finishing of sheet metal parts offers a selection of heads and widths for most sheet metal finishing tasks.
The largest of the Timesavers machines and a best seller is the Timesavers 42 Series WRBW machine. Ideal for the deburring and edge rounding of laser, flame, plasma and waterjet cut parts as well as the finishing of punched and machined parts, this machine can conduct the pre-grinding of heavy burrs and the final surface finish graining of components in one pass, and incorporates a vacuum conveyor as standard. The new 1000 mm wide version will be on display.
