Software developed for CMM and measuring arm retrofit

Microlog XG CMM software has been developed specifically for retrofitting to smaller CMMs and portable measuring arms, as these machines are generally used on relatively straightforward applications. With a fully integrated CAD engine to enable users to import 3D CAD models with ease, Metrolog XG has been designed to provide operators with a simplified user interface that retains the most of the measuring power of higher cost, higher level software. The case for an entry-level CMM software retrofit is clearly evident. At present, users really only have two choices – high level software that is expensive to purchase, or cheap software that is simply not up to the job with little in the way of support or future development. With this in mind, the developers of Metrolog XG, the World’s leading CMM retrofit software, decided to package a CMM retrofit for entry level inspection applications, where all the “bells and whistles” of the market leading Metrolog XG are simply not required. “Many users will never have the need to use the latest technology, such as laser and scanning probes, but they still need access to a comprehensive CAD based measuring system that is supported by an experienced market leader,” comments Iain Caville, managing director of Measurement Solutions, the UK based distributor and support partner for Metrolog XG. The two key elements of the software are ease of installation, and ease of use. Microlog XG is the first “plug and play” CMM software that directly interfaces with most makes and types of CMM controller. This means that any manual or CNC machine from manufacturers such as Hexagon, LK, Mitutoyo, Zeiss, Stiefelmayer, Wenzel, Sheffield, plus many others, can now be quickly upgraded without the need for expensive hardware upgrades. In those cases where the controller hardware is already obsolete, Measurement Solutions can offer a range of controller upgrades that can have a CNC machine up and running again within a few days. The software also lends itself ideally to portable measuring arms, with a suite of special tools dedicated to the type of measurements often performed with these devices. Once again, direct interfaces are readily available for all types of arm – Faro, Romer, Cimcore, Garda, etc. The user interface has also been designed with simplicity in mind. Unlike traditional CMM software where numerous windows are often on display, Microlog XG only has 2 windows – a graphic CAD display, and a special Action Panel that is the only window requiring operator interaction. All common measuring functions have been allocated to the function keys on a standard PC keyboard, so the user has direct access to the measuring functions without the need to search through menus. During a measurement, the Action Panel displays real-time feedback with information regarding the quality of the measurement, if a bad point is taken, etc. Once a measurement is completed, the user can even go back and measure more points on the same feature to improve the quality of the data. For repeat measurements, programming could not be easier, as the software automatically remembers what actions were taken, and then prompts the user to repeat the measurements. The program is saved in an easily readable format, so no programming ability is required from users. The program can be enhanced at any time with prompts that include pictures and operator instructions, making measurement simple, quick and reliable. When a part has been measured, Microlog XG can export data for use in other software, just like most CMM software. However, this method requires operators to be proficient with other software applications, so Microlog XG also includes a unique Report Wizard, which gently guides the user from measurement result data to a high quality printed report that can include tabulated results, pictures of the part, result stickers, etc. Microlog XG is equally at home with or without CAD data. If a CAD model is available, measurement results are automatically superimposed on the model. To measure a feature, the user simply chooses it by clicking on the CAD model, and then probes the feature accordingly – with a CNC machine, the software will automatically instruct the machine to measure the feature. However, even without CAD data, the software will routinely create a 3D drawing of the part being measured as each feature is being probed. These features can then be selected directly from the graphics screen in the case of constructions, distances and angles, etc . Despite being described as “entry-level” software, Microlog XG still includes many powerful functionalities to deal with most applications, including measurement of free form surfaces, sections and profiles, calculation of basic GD&T, expansion and shrinkage, plus multiple alignments including best fit, RPS, geometric, etc. The software is also backed up by annual software updates, hotline telephone support by experienced CMM users, and an advanced help system. “Most CMM’s in use today are mechanically sound, and still capable of producing perfectly good measurement data” says Iain Caville. “The problem really lies with the software, which has failed miserably to keep up with technological requirements. Now, we can offer CMM users a cost effective way to start using CAD based software, backed up by the World’s largest independent CMM software company”.