Available in four variants that take in the Lubrivac 80, 100, 200 and 400 systems, the designations relate to tank capacity, with water lift rates from 2,500 to 3,600 mmH2O.
The Lubrivac 80 unit has an efficient 2 kW motor and 360 m3/hr maximum airflow while the Lubrivac 400 has a 4kW motor that generates a maximum water lift rate of 3,600 mmH2O and a maximum airflow rate of 400 m3/hr.
As the most suitable solution for the everyday machine shop, the Lubrivac 200 incorporates a flux inversion system for liquid discharge at a rate of 100 l/min with an integrated sieve grid basket to separate swarf and solid waste from liquids.
For the cleaning and separation of coolant, the Lubrivac 200 can be supplied with an optional PPL filter. This is available as a 300, 100, 90 or super fine 10 micron solution that can be installed either as a filter basket or outlet filtration configuration, depending upon the separation level required.
From a safety perspective, the Lubrivac 200 has a float device installed to automatically prevent overfilling when the 200 litre tank is full. It also has a tangential suction inlet with an integrated cyclone system that delivers an air flow of 540 m3/hr via its 50 mm diameter suction inlet. This suction inlet provides a water lift rate of 2,500 mmH2O.
