Improved Trumpf software for TruBend Series 5000 press brakes (Video)

As seen in this split screen video, a box part, measuring 1,000 x 600 x 1.5 mm, is produced simultaneously on a TruBend running the TASC 6000 v 6.0 software and also its forerunner, v 5.2. Both screens show the operator making ten bends at three stations but the new software allows him to complete the task 24 per cent quicker. Instead of taking 2 minutes 8 seconds, it takes just 1 minute 36 seconds. Several features contribute to this performance. An automatic step control allows the back gauge finger to move automatically in a raised position and with maximum speed, to the programmed position. The back gauge also moves in parallel with the press beam to reduce cycle time and increase productivity. Additionally press beam travel and adjustment for crowning, now happen simultaneously and the BendGuard safety system works uninterrupted, in box mode. The box height is pre-programmed and the press beam is therefore able to get into position at speed. The new software also provides operation data recording for production control, maintenance planning and cost analysis.