Modular workholding system for 5-axis machines

Increasingly, the 5-axis machines are used in the production processes to be in accordance with the demands of today's efficient manufacturing and remain globally competitive. The workpiece clamping can be very demanding.

Benefits of Triag 5-axis workholding systems:

• The lower base rails serve both as a mechanical zero-point clamping system and as a vice.

• The tension acts directly at the workpiece, the workpiece is still, whether small, long or large, very accessible with short tools. The constraint is the machine table.

• 3-side machining is possible as well.

• There are over 50 different clamping modules, as well as, raw modules, self-centering modules, three jaw chuck, collet chuck, vacuum clamping modules, with the interface is always the same.

• Fast setup.

• Reduced cleaning required, as no T-slots used.

• Are not only suitable for 5-axis machines, all parts can be used on horizontal and vertical machines as well and being used universally.

Author
Michael Richards

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Supporting Information

Related Companies

Triag Prazisionswerkzeuge Ag

Do you have any comments about this article?

Name

Comments

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.