Vero Software has appointed Martin Measures as the Alphacam area sales manager for the Midlands region.
Read More
|
TechCADCAM, UK distributor for GibbsCAM, celebrated its 25-year anniversary in April.
Read More
|
Shropshire-based Proto Labs are celebrating being named as winners of the 2013 Queen's Award for Enterprise: International Trade - the second time the company has been honoured with the award.
Read More
|
Vero Software has appointed Simon Lee as general manager of the recently acquired Sescoi business.
Read More
|
Delcam will host a UK robot machining event this week, which will be held at CNC Robotics in Liverpool on 25 April.
Read More
|
Delcam will launch the 2013 version of its PowerINSPECT inspection software this week at a free-to-attend half-day seminar at its Birmingham headquarters on 23 April.
Read More
|
Preparations for MACH 2014 (Birmingham NEC, 7-11 April), the UK's premier manufacturing technology event, are underway, with early signs pointing to high levels of interest from exhibitors, reports organiser, the Manufacturing Technologies Association (MTA).
Read More
|
Edgecam is celebrating its 30th anniversary. The CAM package was launched by Pathtrace, in collaboration with Surrey University, in 1983.
Read More
|
Edgecam software has appointed Wesley Tonks as Strategic Partnership Manager to extend the company's partnering activities with machine tool and tooling manufacturers.
Read More
|
Kerf Developments has become the UK and Ireland's flagship dealership for the Burny & Kaliburn range of control systems and high density plasma cutting and marking systems.
Read More
|
A control system based on products from Omron is helping machine-tool expert Halifax Numerical Controls (HNC) achieve success in the UK and around the world in the competitive market for roll grinders for rubber-coated rollers.
Read More
|
Birmingham-based CADCAM software developer Delcam has become a member of the Manufacturing Technology Centre (MTC) in Coventry, which is part of the government's seven technology centre High Value Manufacturing Catapult network.
Read More
|
Delcam will launch the 2013 version of its PowerINSPECT inspection software with a free half-day seminar at its Birmingham headquarters on 23 April.
Read More
|
The 14th World Conference of the International Special Tooling & Machining Association (ISTMA) takes place at the Tortworth Court Hotel from 3rd to 5th April, Wotton-under-Edge, with Delcam sponsoring the opening dinner.
Read More
|
Hurco Europe's forthcoming Open House, to be held on 23, 24 and 25 April from 9.00 am until 5.30 pm each day at its High Wycombe showroom, is said to be one of the most significant so far held, with new machining centre announcements, innovative technology for control, diagnostics and networking, plus a complete rebranding of the company logo and machine tool livery.
Read More
|
Lantek puts the emphasis on solutions for sheet metal and fabrication
Read More
|
CGTech, the developer of VERICUT software, is celebrating a quarter-century of leading the development of numerical control (NC) program simulation and analysis software.
Read More
|
At a free-to-attend seminar, COMET project partner Delcam will host a UK robot machining event, which will be held at CNC Robotics in Liverpool on 25 April.
Read More
|
With four Vero brands on show at the Southern Manufacturing Exhibition – Alphacam, Edgecam, Javelin and Radan – the company reports higher visitor levels, compared to last year, with firm orders and strong leads reported.
Read More
|
Delcam will demonstrate the programming of robot machining at the JEC exhibition, to be held in Paris from 12 to 14 March.
Read More
|
CGTech will demonstrate its new programming and simulation software for Automated Tape Laying (ATL) machines at the JEC Composites show, March 12-14, 2013 at the Paris Expo, Porte de Versailles.
Read More
|
Vero Software has strengthened its Edgecam product team with the appointment of an International sales manager.
Read More
|
Rapidly growing CADCAM specialist Vero Software has acquired the Surfcam assets from Surfware Inc, a US-based CADCAM software firm. (Corrected - 21/2/2013 - removed TrueMill inclusion as part of assets)
Read More
|
Edgecam CAM software broke all its records for sales and service in 2012.
Read More
|
Engineering Solutions, the specialist support division of The Engineering Technology Group, has been appointed as the UK agent for FactoryWiz, a monitoring and data collection package that acts as a 'black box recorder' for CNC machine tools.
Read More
|