|
|
|
|
|
|
|
|
|
|
November 2009
 Email to a friend
|
| |
The new DT-1 from Haas Automation is a compact, high-speed drill and tap machine with full milling capabilities.
 The machine features a 508 by 406 by 394 mm work cube and 660 by 381 mm T-slot table, while maintaining a very small footprint.
A 15 hp, BT 30 taper spindle spins to 15,000 rpm, and allows tapping at speeds to 5,000 rpm.
The DT-1 is equipped with a high speed, 20-pocket, servo-driven tool changer that swaps tools in 0.8 seconds.
High speed, 61 m/min rapids combine with 1 G acceleration rates to shorten cycle times and reduce non-cutting time. Maximum cutting feedrate is 30.5 m/min.
For efficient chip removal, the DT-1 features steeply sloped internal sheet metal. Optional twin chip augers transport chips to exit at the rear of the machine. A 45 gallon flood coolant system is standard, with options for a programmable coolant nozzle and high-pressure through-spindle coolant systems.
|
|
| |
Author
Nicki McKenna
|
| |
| |
This material is protected by Findlay Media copyright 2010.
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.
|
| |
|
|
| |
To comment on news stories or blogs you need to complete our 60 second registration process. Once completed this then allows you to download any and all white papers, register for e-zines and access our detailed supplier directory for FREE.
If you are all ready a registered user then enter your e-mail address and login.
You will need to have logged in prior to entering your comments in the boxes provided.
|